Power Hertz EP 4, made in italy Rp 3.300.000







Output Power (RMS):

60W x 4 @4-ohm

95W x 4 @2-ohm

3 channel mode: 60W x 2 (4ohm) + 190W x 1 (4ohm)

95W x 2 (4ohm) + 190W x 1 (4ohm)

190W x 2 (4ohm)

Filters & Controls:

A Channels: Full / Hi-pass / Lo-pass: 40 - 400Hz @12dB/Oct

B Channels: Full / Hi-pass / Lo-pass: 40 - 400Hz @12dB/Oct

C Channels: Bass Boost: 0-12dB @45Hz

T.H.D. (100Hz @4-ohm): 0.08%

Bandwith (-3 dB): 7 - 60Hz

S/N Ratio (A weighted @1V): 98dBA

Damping Factor (100Hz @4-ohm) >130

Pre-In sensitivity: 0.3-5Volts

Pre-In impedence: 15 kohms

Speaker-In sensitivity: 1.4-24Volts

Speaker-in impendence@ 5kOhms

Power supply voltage: 11 - 15Volts

Idling current: 1A

Idling current when off: 0.02mA

Consumption @2ohm, 14.4VDC: 28A

Remote In: 6-15 VDC - 1mA

Remote Out: 12 VDC - 50mA

Automatic Turn On/Off with speaker in

Fuse: 2x25A

Dimensions (mm): 240 x 350 x 54



The EP 4 is an amplifier designed to reproduce any musical genres: thanks to its four separate channels, it provides many different system configurations.

Pre-amplified inputs as well as hi-level inputs offer the possibility for the EP 4 to be interfaced with any head units, including factory OEM sources.

EP 4 boasts extreme reliability thanks to the use of FR-4 double layer PCB material. 70�m thick copper traces in combination with robust copper bars are used for paths with high current transfer.

The B channels feature Bass Boost adjustable within a range of 0 � 12 dB at 45 Hz to offer a deep, solid bass with control. Advanced electronics and optimized cooling system allow the EP 4 to provide high power, even under difficult conditions.

The Hertz EP range of amplifiers destroy age-old perceptions of what a consumer can expect at a certain price point. Hertz EP rewrites the rules of what to expect from an entry-level amplifier!



With lots of filtering combinations built-in, the EP range is never stuck for a solution despite its affordability. A perfect match for Hertz subs and speakers, the high-tech finish overcomes any shyness of putting these amps on-show and the fundamental design philosophy means they will perform flawlessly for many years to come.









Power Hertz EP 5, 5 channel Rp 4.900.000



Spesifikasi : 4x60w + 1x160 W @ 4 ohm

4x95w + 1x250 w @ 2 ohm



















1 FR-4 dual-layer 70μm copper thick PCB and robust copper bars for high current transfer,

shorter audio signal paths and high reliability.

2 Output stage based on High Current & Power Dissipation SANKEN TO3P transistors.

C channels, dedicated to the subwoofer, are realized with single hi-power output stage

instead of bridged internal configuration of traditional designs offering higher power and

control on the subwoofer speaker.

3 Dual separate power supply stages for A, B channels and C channel based on Multi-winding

toroidal transformer and Low ESR 105�C resistant electrolytic capacitors.

4 Special pseudo-balanced dual input circuitry to reject electromagnetic disturbances present

on the Pre-amplified or Speaker-In.

5 Pre-amplified and Speaker-In allow interface with aftermarket or OEM sources.

Speaker-In are provided with compact “install-friendly” connector.

6 ARTTM-Automatic Remote Turn-On/Off function turns the amplifier on and off in perfect sync

with the source, eliminating the need for a remote signal when using the Speaker-In.

Remote Out signal is also provided to turn on/off other components installed in the system.

7 Flexible crossover system allows full range or hi-pass 12dB/Oct. filter on A & B channels for

front plus rear configuration and lo-pass 24dB/Oct. filter on C channel for optimal subwoofer driving.

8 3-Channel mode switch is provided to easy set up the amplifier for high power front speaker

system plus subwoofer to achieve up to 190W x 2 (4Ω) + 250W x 1 (2Ω).

Price €460





Power Zapco ST 4D, 4channel Rp 3.500.000



power berukuran mini 17cm(lebar)x 5.5cm(tinggi)x 20cm(panjang) menghasilkan tenaga yang menghentak... 100watt rms per chn



suara sangat jernih dan bass padat





image shack



Stereo, 4 ohms: 4 x 100 Watts

Stereo, 2 ohms: 4 x 160 Watts

Bridged, 4 ohms: 2 x 160 Watts

T.H.D. + Noise: