Kondisi Barang : Baru
Harga :
Lokasi Seller : DKI Jakarta
Description :
[/quote]
Quote:
The Turnigy Accucel 6 Balance Charger utilises quality FETs and resistors to accurately balance and charge Lithium Polymer and NiMH batteries.
The Accucel-6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately either at the field by using a 12v input such as a car battery or at home with a 12v power supply.
Bundled with the Accucel-6 is a bunch of input and output wires which should satisfy any charging requirement.
Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
Spec.
Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g
Includes a full range of adapter plugs and wires.
yang butuh manual bisa download di sini... (link lokal kenceng euy)
STOCK READY!!
|
Quote:
--------------------------------------------------------------------------------------------------------------------------------------------------------
****POWER SUPPLY****
Power supply ini menggantikan model sebelumnya yg sharp,di karenakan supply dari pabrikan yg terhenti,terpaksa saya mengambil model baru ini. spesifikasi sama,12V 5A.sudah di test dan memenuhi syarat,arusnya stabil.
di adaptor ini terdapat lampu warna biru sebagai indikator bahwa power supply siap digunakan.
harga 170.000
buat yg ngambil sepaket sama chargernya akan dapet harga special pake telor... 
CALL 021-93610201
SMS 087-8888-25588
yang doyan chatting bisa tanya2 dulu via YM..
klik aja iconnya di bawah ini....
[center] " border="0" alt="" />
Pembayaran bisa melalui:
  
|
Quote:
EXTREME X-605
This eXtreme 605 is a rapid charger with a high performance microprocessor and specialized operating
SoftwareOptimized operating software
eXtreme 605 features an AUTO function that controls the charge rate during charging and discharging. For Lithium batteries, this can prevent overcharging which may lead to an explosion due to the user's setting the charge rate improperly. It will disconnect the circuit automatically and initiate an alarm if there is any malfunction. All the operating modes of this charger are controlled through two way communication, between the charger and the battery to achieve maximum safety. All the settings can be configured by the user.
Internal independent lithium battery balancer
The eXtreme 605 employs an individual-cell-voltage balancer. It is not necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, the eXtreme 605 can monitor and balance each cell of the battery individually. An error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various types of lithium battery
eXtreme 605 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
"Fast" and "storage" mode of lithium battery
There are various methods of charging Lithium batteries. "Fast" charge reduces the charging time whereas "store charge" can control the final voltage of your battery. This method is best for long term storage and protects the useful life of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit:
You can set the upper limit of the charge current when charging your NiCd or NiMH batteries.This is useful for NiMH batteries of low impedance and capacity in the 'AUTO' charging mode.
Processing time limit:
The user can set the maximum charging time. If the charging time exceeds the limit, the process will be terminated automatically when you set the maximum time for the charging mode.
Data store/load
The "" can store data from ten different batteries. The user can set the charging / discharging parameters for a particular battery type and "call up" these settings to charge a battery without additional programming needed.
HARGA: 375.000
dalam packagenya,terdapat berbagai macam konektor,jadi anda tidak perlu pusing dengan permasalahan konektor lagi,mendukung berbagai macam konektor yg di perlukan untuk bermain r/c
CALL/SMS
021-93610201
087-8888-25588
|
[quote]
IMAX-B6
This iMax B6 is a rapid charger with a high performance microprocessor and specialized operating
SoftwareOptimized operating software
iMax B6 features an AUTO function that controls the charge rate during charging and discharging. For Lithium batteries, this can prevent overcharging which may lead to an explosion due to the user's setting the charge rate improperly. It will disconnect the circuit automatically and initiate an alarm if there is any malfunction. All the operating modes of this charger are controlled through two way communication, between the charger and the battery to achieve maximum safety. All the settings can be configured by the user.
Internal independent lithium battery balancer
iMax B6 employs an individual-cell-voltage balancer. It is not necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, the iMax B6 can monitor and balance each cell of the battery individually. An error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various types of lithium battery
iMax B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
"Fast" and "storage" mode of lithium battery
There are various methods of charging Lithium batteries. "Fast" charge reduces the charging time whereas "store charge" can control the final voltage of your battery. This method is best for long term storage and protects the useful life of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit:
You can set the upper limit of the charge current when charging your NiCd or NiMH batteries. This is useful for NiMH batteries of low impedance and capacity in the 'AUTO' charging mode.
Processing time limit:
The user can set the maximum charging time. If the charging time exceeds the limit, the process will be terminated automatically when you set the maximum time for the charging mode.
Data store/load
The "" can store data from ten different batteries. The user can set the charging / discharging parameters for a particular battery type and "call up" these settings to charge a battery without additional programming needed.
Cyclic charging/discharging
HARGA: 375.000
CALL/SMS
021-93610201
087-8888-25588
28th July 2012
Charger LIPO TURNIGY ACCUCEL-6 buat baterai aersoft,murah meriah!!!
